Prediction of Burning Injuries Using Human Models Equipped with Instruments-Experimental ReportRelease time: 2014-11-19 16:05
9 Experiment report
9.1 General. Information described in 9.2. 9.6 shall be included in the test report.
9.2 Specimen type. For experimental purposes, see Article 1.
9.3 Sample description. Specimen (s) described in the following information items: type / size of garment / assembly, fabric weight per unit area, fiber type, color and non-standard garment function and design features. Include a description of any pretreatment of clothes / components, such as washing, and any holes or cutouts in the clothes / components to accommodate cable connections.
9.4 Exposure conditions. Records, describing information about exposure conditions, including: total number and general arrangement of burners used to create the flash fire exposure; descriptions (such as symmetrical placement on thighs and knees, two burners in each quadrant flat on knees and chest) A simple sketch is sufficient; the average value of the heat flux density level of exposure and the standard deviation measured from full naked exposure after each test series before and after (see 8.1.4 and Section D.2); nominal heat flux density, duration of exposure And the duration of the data acquisition time for each test; any other information about the exposure conditions that may help explain the results of the test strip.
9.5 Result calculation
The results can be based on two measurements: the total surface area of the dummy receiving the second and third degree burns, and / or the total energy transferred to the surface of the mannequin during data acquisition. These two measurements are directly related.
For all materials, the evaluation of the garment and the specification of the test report include at least the results from the computer program, the information shown in 9.5.2 and 9.5.3. Both the total area of the manikin-containing heat flux sensor on the pedestal and the predicted area of the total area of the manikin on the sample covered. For authentication purposes, it is best to use scalds based on the total area of the heat flux sensor containing the manikin.
Note: Other useful measurements are the time it takes for pain and the first burn injury to occur.
9.5.2 The predicted total area of the human body model (%) Injury Based on the total area of the human body model contains a heat flux sensor; second-degree burns (%) predict the dummy area; degree burns (%) predict the dummy area. The statistics of the changes related to the area of the second degree burn and the third degree burn (%) and the total dummy area, such as the standard deviation.
9.5.3 Samples of manikin injury based on the predicted total area (%) of the area covered by the manikin. Second-degree burns (%) predicted coverage area. Third-degree burns (%) are expected to cover the area. Sum of the second degree and third degree burns (%) and the total estimated area covered and related changes, such as standard deviation.
9.5.4 Other Reportable Information. A magnetic flux sensor for a sampling period of the data that is received by the sum of the energy of each of the heat flux sensors and the sum of the energy received. The human figure shows the location and burn level to predict second and third degree burns. Results for each heat flux sensor in the table.
Report any comments on the results of the specimen exposure in the test record. These observations may include, but are not limited to:
Intensity, duration and after-sales service, location of flames and / or afterglows;
Generation of fumes and / or toxic gases;
Test the physical stability of the sample, including dimensional changes (if any);
Any other observation that can be used to interpret the results describes the performance of the test strip.
Support opinions with visual image recording (see 5.7, 8.2.3, 8.2.5 and 8.3).
Article source: Standard Group (Hong Kong) Limited
- What are the precautions for purchasing flame retardant fabrics?
- Car safety crash test dummy unemployed
- Human body 3D scanning technology attracts members into the gym
- Interpretation of the characteristics of the spine of a colliding dummy
- Black technology! 3D body scanner can be used for measuring body
- Apple vs. WeChat-Chinese Internet companies
Previous: Previous: Main application fields of 3D human scanner