2020生肖表

Position: Home > Technical Articles >

technical article

Burning dummy picture

Release time: 2016-11-21 17:32

189875ed-6299-4c75-a86f-b508b0c65dbc.jpg!w300x300.jpg

The combustion dummy test system is used to test the overall thermal protection performance of protective clothing. The complete combustion dummy system consists of a combustion chamber, a combustion dummy and a gas supply control system.

maxresdefault (1).jpg

The duration of the flame of the burning dummy body when used in clothing testing is generally 4 s. The surface of the dummy may need to withstand a burning flame of up to 300 ° C. Therefore, the material of the dummy body must have a short-term burning flame above 300 ° C. Good thermal stability, can withstand the harsh fire environment; the response of the sensor on the dummy surface to the combustion flame should be close to the human skin's response to the combustion flame; the data acquisition and processing device can quickly collect the dummy surface sensor data.

UT8av1XXGRaXXagOFbXE.jpg

The system is mainly composed of a burning dummy, a data acquisition device, a flame generation and control device, a skin heat transfer model and a burn evaluation model, and a system centralized control and application software platform. The design principle is to simulate the thermal exposure process of the human body in the burning flame and test the change of the surface temperature of the dummy. It is estimated that the second and third degree burns of the skin and the percentage of total burn area may be caused. The worse the flame retardancy protection performance.

5462f4c92f9d2.image.jpg

maxresdefault.jpg

TPACC-image-600.jpg

幸运飞艇靠谱投注平台【上荣鼎复制rd1133.com网址】极速快3彩票北京赛车可靠平台网址【上荣鼎复制rd1133.com网址】天天体育新闻网九州彩票网【上荣鼎复制rd1133.com网址】秒速飞艇官网实时开奖十大澳门线上娱乐城【上荣鼎复制rd1133.com网址】秒速赛车-开奖结果-记录-官网ag真人视讯【上荣鼎复制rd1133.com网址】乐趣彩票导航网址【上荣鼎复制rd1133.com网址】